طابعة A1 mini حل اقتصادي للطباعة بالألوان من الشركة العريقة Bambulab اذا ماكنت تحتاج الى حجم طباعة اكبر.
- معايرة تلقائية: تتعامل الطابعة A1 Mini مع معايرة ارتفاع المحور Z، مستوى السطح، تردد الاهتزاز، وضغط الفوهة تلقائيًا.
- سطح الطباعة: 180 mm 180 x mm 180 x mm
- طباعة متعددة الألوان: استمتع بطباعة ملونة باستخدام نظام AMS Lite.
- إعداد سهل وسريع: مجهزة مسبقًا وجاهزة للطباعة في 20 دقيقة.
- تحميل الفلمنت تلقائيًا: تبديل الفلمنت بسهولة.
- دقة وسرعة: طباعة سريعة بتسارع 10,000 مم/ث².
A1 mini Tech Specs
ItemA1 mini SpecificationBodyBuild Volume(W*D*H)180*180*180 mm³ToolheadHot EndAll-MetalNozzleStainless SteelMax Hot End Temperature300 °CNozzle Diameter0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mmHeatbedBuild PlateBambu Textured PEI Plate (Included)
Bambu Smooth PEI PlateMax Build Plate Temperature80°CSpeedMax Speed of Tool Head500mm/sMax Acceleration of Tool Head10000mm/s²Supported FilamentPLA, PETG, TPU, PVAIdealABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced PolymerNot RecommendedSensorsMonitoring CameraLow Framerate Camera (Up to 1080P)
Timelapse SupportedFilament Run Out SensorYesFilament OdometryYesPower Loss RecoverYesFilament Tangle SensorYesPhysical DimensionsA1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg
A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg
Bambu Lab
- A1 mini ComboMulti-Color Printing
- Plug-N-Play
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High Speed Precision
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
